Posted on

growing weed inside for dummies

Growing weed inside for dummies

Metal-halide (MH) lights are a type of high-intensity discharge (HID) lights that work by igniting gas in a tube with a spark of electricity. Metal-halide bulbs emit a spectrum of light that is most beneficial during the vegetative phase. They emit more usable light for a plant than a fluorescent bulb does, but tend to cost substantially more.

Top feed drain-to-waste systems can be as simple as putting your plants in a soilless medium and watering them from the top of the container, either with a drip system or by hand.

Most local jurisdictions require you mitigate the odor from your plants to avoid disturbing your neighbors. Activated charcoal filters absorb plant odor in your grow area. Adding a charcoal filter to your HVAC system or placing one within your grow space is a great way to drastically reduce the odor. The size of the filter is largely dependent on the size of your grow. Make sure filters are sized and installed correctly. Keep track of the life of the filter, as their effectiveness diminishes over time.

Creating the ideal environment

The intensity of light and its placement within your grow space are important aspects to consider when choosing what kind of light to grow with. Low light levels will slow photosynthesis, delay growth, and result in poor yields. If your light is too far away the plant will not receive enough of it and will grow spindly. If your light is too close it can damage the plant and ruin your colas.

Air movement is the least expensive component of creating an ideal environment for your plants. Even a gentle breeze can help keep pests and microbes from landing on your plants, move oxygen and carbon dioxide around the leaves, and create a uniform environment throughout your room. One of the easiest ways to maintain sufficient air circulation is by hanging oscillating fans on the walls or ceiling/grow tent corners and placing a small box fan on the floor. The goal with air circulation should be to mimic a light breeze and avoid powerful gusts that may harm your plants.

Distilled and reverse osmosis water are fairly comparable. It’s the process of distilling that differs from the reverse osmosis process. Distilled water has been boiled to a vapor and cooled back into liquid to filter out contaminants. Reverse osmosis (RO) filters pressure water through a filtration membrane and produce wastewater as a byproduct. They’re generally better than distillers at removing volatile chemicals such as chloramines.

Cannabis feeding systems

Rockwool , also known as mineral wool, is one of the most common forms of hydroponic media for the beginning stage of a plant’s life. Rockwool is an inert substance, and its composition of mineral or rock fibers provides a relatively sterile environment with a unique capacity to hold water. Rockwool will quickly expose any watering or feeding mistakes. Missing even one day of watering could be detrimental when using rockwool, especially for tender young plants.

CO2 can be supplemented into an indoor garden using compressed gas tanks or generators. Using compressed CO2 tanks is the most common method because they’re readily available, easy to set up, and do not add any extra heat to your room the way a CO2 generator does.

Growing weed inside for dummies

Looking for the basics of how to grow marijuana? Here are the tools and information on how to grow weed affordably and effectively. All you need is a small discreet space and a little bit of a budget to get started on your indoor pot production.

Grow Tools

Pinterest

How To Grow Weed

Post-harvest, you will trim and hang up your buds to dry. This process should take about a week or two depending on the humidity and heat in your area. It’s always best to keep this process slower than 3-4 days in order to ensure you aren’t locking in that “green” chlorophyll taste. Add a humidifier to your drying room if you think your nuggets are drying out too quickly. Never leave a fan blowing directly onto your drying colas but make sure air is circulating to avoid mold and bud-rot.