Cannabis plants yield the highest-quality (and quantity) flowers after maturing. This usually takes about a month to happen. “I recommend planting in a five-gallon Home Depot bucket,” Lipton said. “It’s really important to have proper drainage, so you want to drill some holes in the bottom. The biggest mistake people make is that they overwater and suffocate the roots. Cannabis likes to be watered and dried out before it’s watered again.” During the vegetative cycle, the plant should be exposed to a minimum of 18 hours of light. Remember to open the closet door while the lights are on to prevent the space from heading north of 78 degrees Fahrenheit.
Light: 2,200k. “For a closet set up, I would recommend a 175-watt HPS light,” Lipton said. “Some people try to use fluorescent lighting, but I wouldn’t recommend that. You’re just not going to get a very good outcome. Nowadays, HPS lights can just go right into your home outlet, and you’d just need a timer [to set the intervals]. Position the light directly overhead. They can be pretty powerful, so you’re going to want it at least two feet from the top of the canopy [to prevent the plant from overheating].”
Relative humidity: 30 to 45 percent. “If you live somewhere humid, you’re probably going to want to buy a dehumidifier,” said Lipton. “In Boulder, we sometimes have to add humidity.” At home, that can be done with a reliable humidifier.
Plant and maintain the vegetative cycle until the plant is mature.
Even with a healthy clone, however, cultivating cannabis can be a long and arduous process — especially in tight indoor spaces. “A lot of people think growing is easy, but it’s not,” Lipton said. “You have to be really on it. Not everyone has success, obviously.”
Presented by Florida Man DIPA
Trigger the flowering cycle.
Space: 3 x 3 x 5 feet, minimum. “The bigger the space, the better. With all the lights, closets get hot,” Lipton said. That said, closets help growers control light pollution when the plant is in its flowering cycle — one of the main reasons home growers favor them over larger spaces, such as living rooms. “If you have a spare bedroom, or a basement even, you can just use that and close the door,” Lipton said.
It’s important to remember that cultivating even one cannabis plant for personal consumption is felony on the federal level and punishable by up to five years in prison. Meanwhile, four US states — Alaska, Colorado, Washington D.C. and Oregon — have passed local amendments, allowing citizens who are 21 years old and over to grow a limited number of plants without fear of persecution.
Rockwool , also known as mineral wool, is one of the most common forms of hydroponic media for the beginning stage of a plant’s life. Rockwool is an inert substance, and its composition of mineral or rock fibers provides a relatively sterile environment with a unique capacity to hold water. Rockwool will quickly expose any watering or feeding mistakes. Missing even one day of watering could be detrimental when using rockwool, especially for tender young plants.
Deep Water Culture (DWC) is a modular bucket system that suspends the plant’s main stem in a net basket while the roots are completely immersed in a highly oxygenated nutrient solution. An air pump supplies the oxygen to the nutrient solution which circulates through 3-5 gallon, or 11.4-18.9 liter, pots. DWC buckets can be configured to run in a stand-alone drain-to-waste system, or all of the buckets can be connected together to run in a recirculating manner.
Aeroponics are hydroponic systems in which the roots are suspended in air and lightly misted with a nutrient solution on regularly timed intervals. This method can achieve faster growth rates while using less water and nutrients than other hydroponic systems, though this is considered of the most advanced methods of growing hydroponically.
Remember, a common mistake newbie growers make is to overwater plants.
HID (high-intensity discharge) lights are the industry standard, widely used for their combination of output, efficiency, and value. They cost a bit more than incandescent or fluorescent fixtures, but produce far more light per unit of electricity used. Conversely, they are not as efficient as LED lighting, but they cost much less.
Light emitting diode (LED) technology has been around for a while, and they are getting more efficient all the time. The main drawback to LED grow lights is their cost: well-designed fixtures can cost 10 times what a comparable HID setup would.
If you can’t afford both MH and HPS bulbs, start with HPS as they deliver more light per watt. Magnetic ballasts are cheaper than digital ballasts, but run hotter, are less efficient, and harder on your bulbs. Digital ballasts are generally a better option, but are more expensive. Beware of cheap digital ballasts, as they are often not well shielded and can create electromagnetic interference that will affect radio and WiFi signals.
Watering and nutrients
Most dehumidifiers and ACs have built-in thermostats, but if they don’t, you’ll want to buy an external one.
Inexpensive options include standard plastic pots or cloth bags, while some growers choose to spend more on “smart pots” or “air pots”—containers designed to enhance airflow to the plant’s root zone.
Fans should be positioned to provide direct, even airflow throughout the garden. This typically involves using multiple fans that work together or fans that have oscillation capabilities.
Controlling temperature in your indoor grow room or cannabis garden can be achieved by manipulating these factors:
Here are some ways to mitigate odor when growing weed indoors.