Before watering, check the pH of your water and add pH Up or Down if needed.
Carbon filters usually work best when positioned at the highest point in your grow space, where the most heat accumulates.
As much fun as growing marijuana indoors is, having a home that perpetually smells like fresh weed can be a serious inconvenience, if not to you than possibly your neighbors. Although weed odor from a small indoor grow in a closet is much easier to manage than a large grow with several flowering plants, both can produce pesky odors that will permeate an entire home if left unattended.
Caring for your indoor cannabis plants
Every space is different and there will be a learning curve to growing in yours.
As your indoor weed plants grow, they’ll need less attention, but you’ll still need to check up on them every 2-3 days.
You can let your plants get as big as you want, and can control when they flower and when you harvest, and you can start another batch right away or whenever you want. You can grow any time of year, even straight through winter or summer, and you’ll get consistent crops each time.
Odor absorbing gels may help
You can make this yourself by combining worm castings, bat guano, and other components with a good soil and letting it sit for a few weeks, or it can be purchased pre-made from a local nursery or grow shop.
For example, it takes less time to grow 3′ weed plants than 5′ plants; in the span of a year, you can maybe grow four harvests of 3′ plants, or two harvests of 5′ plants.
One of the first steps of any grow step is making sure that everything is properly clean. This is done when growing using both grow tents and growing in a room – you need to clean the room and disinfect it before you can start growing your cannabis. We recommend using a product called Purolyt to clean your grow room.
How to Build a Grow Room | Deciding your set-up
Although you have a ventilation system, you’ll still need a way to move air around your room. We recommend using standing fans or clip-on fans on the wall if you have the space, although the choice is yours. You’ll need to place them strategically in order to help distribute any new air you’re taking in so that you don’t end up with stagnant air pockets. Cannabis plants need constant fresh air to survive.
In order to set your grow room up properly, we’ve decided to cover it in this post; we’re going to go over the absolute basic materials needed to set up an indoor grow room. Get everything set up without needing to spend too much money.
To get started, you’ll want to buy a hygrometer and a thermometer. With these tools, you can accurately monitor and then alter humidity and temperature conditions in an attempt to strive for repeatable quality levels time and time again.
If you opt to use the wet trimming method, you will need to spread them out across a large surface area. Aeration is important so you’ll want to avoid setting the flowers on a surface like cardboard or newspaper as the buds will dry unevenly. Wire mesh or netted drying racks are more beneficial. This allows airflow to reach all sides and lessen the chance of moist air pockets. Make sure to allow yourself enough space to spread your crop out evenly with a small amount of space between buds for the best results.
Late flowering (1-2 weeks before harvest)
This technique is usually reserved for growers with a large amount of plant matter and little time to process it. This involves cutting off branches and hanging them whole from drying lines. Once the plants are dry, they are then trimmed and processed. It is more difficult to achieve the neatness of a wet trim as sugar leaves will curl in toward the buds while drying. The agitation of handling a dried bud during trimming can also result in the loss of potent resin crystals.
On behalf of their customers, dispensaries are looking for consistent quality and a range of products. So while the opportunity to run a lucrative and stable growing business has increased dramatically, there is more and more pressure for growers to produce a consistently high-quality product in order to turn increased demand into increased dollars.